|
|
|
| The EPAR range of epoxies is manufactured in New Zealand for New Zealand requirements. A complete range of epoxy systems to suit most commercial, industrial and engineering situations. All EPAR epoxies are solvent free. Refer to selection chart for product application areas. |
|
The information provided on this page is a brief overview of the product and its features. Please refer to our current technical data for complete details on usage and application of any products summarised on this page before specification or use.
|
| Non-slump, general purpose mortar for strong bond to dry/damp concrete or steel. Non-shrink, excellent chemical resistance. 1:1 mix ratio. Available with cold-cure or 5 min hardener. Use in general concrete repair work from small scale to construction projects, especially for precast and special manufacture. Available in all pack sizes up to 40-litres. |
| Non-slump, epoxy mortar, allows hand mixing. Bonds strongly to dry or damp concrete or steel. Non-shrink, excellent chemical resistance. Suitable for all general and contractor work (such as drainage and pipe intersections). 1:1 mix ratio. Available in cold cure (cures down to 0 degrees Celsius), 5-minute and 15-minute formulations. |
| Soft, smooth thixotropic paste. Solventless & non-shrink. 1:1 mix ratio. Can be gunned. Suitable for very fine work as it can be feather edged. Also suitable for fibreglass work including boat building. Available in cold cure formulation for application down to 0 degrees Celsius. |
| Soft, thixotropic epoxy paste, gunable & trowellable. Multiple uses especially where a finer epoxy is required. 1:1 mix ratio. Also available in cold cure formulation especially suited to structural repairs/restrengthening on reservoirs, etc. |
| Light and sandable cold-curing epoxy fairing and filling compound. Non-shrink, non-porous and easily finished using a power sander or hand tools. Suitable for a wide range of gap filling and levelling purposes including filling screw holes in fibre cement sheet, repairing formwork, boat hulls – smoothing, general filling and smoothing applications. Will cure down to 0 degrees Celsius and therefore can generally be used both internally and externally throughout the year. |
|
